19
Before consulting service personnel, check the following chart for
possible solutions.
PROBLEM SOLUTION
TV will not turn on
ƔMake sure the power cord is plugged in. ƔThe batteries
in the remote control may be
Exhausted; replace
the
batteries.
No picture, no sound
ƔCheck the cable between TV and antenna/
external AV
device.
ƔPress the power button on the remote. ƔPress the
SOURCE button the remote, then press the “Ÿ/ź”button
repeatedly to select the TV source.
Poor picture, sound OK
ƔCheck the cable between TV and antenna/
external AV
device.
ƔTry another channel, the station may have
broadcast difficulties. ƔAdjust the brightness/contrast in
the Video menu.
Check that the unit is set to NTSC
Audio noise ƔMove any infrared equipment away from the TV.
The TFT LED panel uses a panel consisting of sub pixels which requires sophisticated
technology to produce. However, there may be
a small number of
bright or dark pixels on the
screen. These pixels will have no impact on the performance of the product.
To Next Page
