Installationguide
t
Instalation of I/O-Board:
1.) Remove the 6 screws from the
Frontpanel of the 309.
2.) Carefully lift the Frontpanel.
Don't you forget the position of the
cable on the right handed volume-
knob-board (red marked cable).
Remove the cable from the volume-
knob-board carefully. It is very
important to fix the cable at the
same position later on.
3.) Turn the Frontpanel counter-
clockwise to 90º.
To avoid the damage of the contacts
place a cardboard between the
Frontpanel and the 309's body.
The arrows show the position
of the screws.
6
To Next Page
Loading...