Quattro Enduro EM4446 User Manual

Ref: QUATTRO500/600-UM
UK
REF: UM 1.0
Model No. EGO400 - Titanium
Model No. EM4446 - Enduro
REMOTE CARAVAN MOVER
Installation guide and user
information.
UK

Quattro Enduro EM4446 Specifications

General

Brand	Quattro
Model	Enduro EM4446
Category	Farm Equipment
Language	English

Summary

Introduction and Specifications

Fitting Guidelines

Installation Safety Guidelines

Crucial safety warnings and precautions to observe before and during installation.

Mechanical Installation

General Mechanical Installation

Covers basic principles, preparation, and safety for mechanical fitting.

Classic Clamp System Installation

Shark Clamp System Installation

Electrical and Electronic Installation

Electrical Connection Preparation

Routing and Connecting Motor Cables

Installing Power Isolation Switch

Instructions for integrating the power isolation switch into the system.

Connecting Battery Cables

Steps for securely connecting the mover to the caravan's leisure battery.

Operational Safety and Motor Units

Operation Safety Guidelines

Essential safety rules to follow during the operation of the caravan mover.

Engaging and Disengaging Rollers

Detailed procedure for manually engaging and disengaging the drive rollers with the tyres.

Remote Control and Control Unit Operation

Remote Control Handset Operation

Electronic Control Unit Functions

Initial Use and Advanced Operations

Pairing Handset and Control Unit

Getting Started with Mover Operation

Hitching and Unhitching Operations

Maintenance and Troubleshooting

Troubleshooting Unit Failures

Solutions for common issues where the unit fails to operate or operates intermittently.

Troubleshooting Operational Issues

Addresses problems like overloaded battery, signal loss, and roller slippage.