Qub Works RWK-01 User Manual

Thank you for purchasing the QUB Works 2.4GHz Wireless Keyboard & Mouse, item RWK-01 . Included with your set is a USB Nano Receiver that can be stored inside the mouse itself, making it perfect for use with laptop computers and easy to
carry when traveling.. Please read this manual carefully FIRST in order to get the most out of your keyboard and mouse.
ITEM: RWK-01
USER’S MANUAL
INSERTING BATTERIES KEYBOARD AND MOUSE SETUP NOTES
In order to connect your keyboard and mouse to your computer, follow
the steps below:
1. Take the USB Nano Receiver from the bottom of your mouse.
2. Plug the USB Nano Receiver into an available USB port on your computer.
3. Make sure that both computer, keyboard and mouse are powered on.
In order to operate your keyboard and mouse successfully, you will need to
insert 2AAA batteries(not inclueded)into the keyboard and 1AA battery into
the mouse. To do so follow the steps below:
1. Pull the battery compartment covers off of both the keyboard and mouse,
revealing the battery compartment. The battery compartment covers are
located on the bottom of the mouse and the bottom of the keyboard.
2. Ineset 2AAA batteries into the batteris compartment of the keyboard and
1AA battery into the mouse, making sure to insert them with the correct
polarity (+,-) as shown on the battery compartment.
3. Once your batteries are properly inserted, you can put the battery
compartment covers back on the keyboard and mouse.
For best results always use new alkaline batteries when powering your
keyboard and mouse. Do not mix old and new batteries or different types of
batteries.
-The mouse will stop working once you pull the receiver out of the USB port
or the computer is turned off.
-You can store your mouse’s USB Nano Receiver underneath your mouse
making it even extra portable and easy to store when not in use.
Wireless keyboard

Qub Works RWK-01 Specifications

General

Brand	Qub Works
Model	RWK-01
Backlight	RGB
Actuation Force	50g
Polling Rate	1000Hz
N-Key Rollover	Yes
Type	Mechanical
Switch Type	Gateron
Connection	USB-C
Keycaps	PBT
Actuation Point	2mm
Total Travel	4mm

Summary

Inserting Batteries

Battery Insertion Steps

Instructions for inserting 2 AAA batteries into the keyboard and 1 AA battery into the mouse, ensuring correct polarity.

Keyboard and Mouse Setup

Connection Steps

Guide to connect the keyboard and mouse by plugging the USB Nano Receiver into a computer and powering on devices.

Notes on Usage

Receiver and Storage

Information on mouse operation stoppage when receiver is removed and storage of the receiver within the mouse.

Features and Specifications

Product Details

Lists key specifications including radio frequency, mouse resolution, power output, battery requirements, operating distance, and compatibility.

Important Safety Precautions

Safety Guidelines

Mandatory safety precautions covering temperature, repair, usage by children, handling, and cleaning instructions.

Sakar One Year Warranty

Warranty Coverage

Details warranty terms for defects in material or workmanship, excluding damage from misuse or unauthorized repair.

Obtaining Warranty Service

Instructions on how to obtain warranty service, including contact information and required proof of purchase.

Troubleshooting

Common Issues

Provides solutions for keyboard and mouse not working, including checking power, distance, drivers, and batteries.

FCC Statement

Compliance and Interference

Explains FCC compliance rules, potential interference, and user guidance to correct interference.