5. USB slot (for playing)
6. MicroSD card slot
(for playing)
7. Micro USB charging port
8. ON/OFF switch
Ensure the battery has been fully charged on the first three
initial uses to ensure the battery’s best performance.
Upon completion of charging, please unplug the charging
cable from the wireless speaker. Do not leave the wireless
speaker charging after it’s fully charged. It may shorten
the lifetime of the battery.
Charging the Speaker
Powering the Speaker
Before using the speaker for the first time, charge it for at
least two hours. Insert the included USB charging cable into
the micro USB charging port. Connect the other end of the
USB cable to a working USB power source.
1. Once fully charged, slide the ON/OFF switch to turn on the
speaker.
2. BT100 is in pairing mode after power-on.
3. To manually turn off the speaker, slide ON/OFF switch again.
2
6 7 8
5
DC5V
ON/OFF
To Next Page
Loading...
General