Wireless charging
USB Charging
1. Place the equipment to be charged on the top circle of the stereo.
2. Device will now start charging.
• Remarks: Check with your device manufacturer for Qi wireless
compatibility.
Power ON & OFF Functions
Pairing the Device
AUX
1. Push the power switch to the ON position to turn on. The
contents of the clock will be displayed.
2. Push the power switch to OFF position to turn off the screen.
1. Place your device near the clock radio.
2. Search for Bluetooth according to your devices instructions.
3. The Speaker is named “QUDOC200BK”, enter the PIN “0000”
if needed.
4. The Speaker will beep at the completion of pairing.
1. Plug the 3.5mm audio cable into the audio input connector and
automatically switch from Bluetooth mode to AUX mode.
2. Unplug the 3.5MM audio cable from AUX and automatically
return to Bluetooth status.
6/10
Connect your device to USB output socket through a charging cable
To Next Page
Loading...
Need help?
General