«On / Off» button for 2 seconds, the red LED will blink three times -
the night illumination is turned off.
• Shutdown
To turn off the camcorder, press and hold the «On / Off» button for 6
seconds. If the Mini Camcorder is in the standby mode and is not in
use, it automatically turns off after 1 minute.
• Viewing files
Connect the camcorder in the off state to the computer - after a few
seconds it will automatically be detected as a removable disk. The
blue indicator will indicate the transfer of information, and the red
indicator will indicate the charging of the built-in battery.
• Setting the date and time
Connect the mini video camera to the computer. Setting the time is
done by creating a text file named «TIMERSET.txt» in the root
directory of the device's memory card, with the following content:
«YYYYMMDDHHMMSS» «Y» (or «N», if you do not want the date
and time stamp displayed on video files)
For example, «20170625140003 Y»
After saving the file, disconnect the video camera from the computer
and turn it on.
Parameters
● Video resolution: 1920x1080, 1280x720
● Frame rate: 15, 30 frames per second
● Video file type: AVI
● Photo resolution: 4032x3024
● Photo file type: JPEG
● Viewing angle: 140 °
● Night illumination: 6 IR LEDs (range of 5 meters, DO NOT emit
light!)
● Motion sensor: Yes (range 5 meters)
● Recording while charging: +
● Duration of work:
• 100 minutes (1 hour 40 minutes) in constant recording mode
• About 5 hours in motion sensor mode
• 24/7 24/7 clock when external power is connected
To Next Page
Loading...