Need help?Do you have a question about the Quest Engineering Atlantic E0014 and is the answer not in the manual?
General| Brand | Quest Engineering |
|---|---|
| Model | Atlantic E0014 |
| Category | Refrigerator |
| Language | English |
Key safety rules for using the refrigerator, especially regarding gas operation and ventilation.
Verify the appliance is not damaged after removal from packaging and report any issues.
Steps for cleaning the inside and outside of the appliance using mild detergent and water.
Ensure good ventilation for the condenser and place the appliance on a flat surface.
Maintain specific minimum distances from walls and avoid flammable materials near the unit.
Connect to mains voltage matching the data plate and set the thermostat for cooling.
Connect to 12V/24V vehicle battery, ensuring correct voltage and fuse protection.
Connect gas cylinder, check for leaks, and ignite the burner using the safety valve and piezo button.
Fill ice tray with water and place in the cooler for ice production.
Run the appliance on 230V for 24 hours before departure and pre-cool food.
Manage frost and water accumulation on the evaporator panel due to opening the lid.
Avoid fragile packaging and ensure food doesn't touch the evaporator panel to prevent damage.
Unplug, remove food, leave lid open for frost to melt, then wipe away water.
Clean the appliance after defrosting following section 3 instructions and leave lid ajar.
Check common issues like ventilation, level, power, and settings before contacting service.
Provide model, product number, and serial number when reporting problems to customer service.
Ensure no other energy source is connected and use a qualified electrician for wiring.
Connect to 12V/24V vehicle battery via fuse and switch, noting cable length limitations.
Use propane/butane gas only, with a non-adjustable pressure regulator matching data plate specifications.
Follow sequence: Bottle → Regulator → Appliance, using approved tubing and checking for leaks.
Details on the refrigerants and blowing agents used in the cooling unit.
Recycle packaging locally and dispose of the appliance at a specialised recycling firm.
To Next Page
