Need help?Do you have a question about the quhwa VP-700 LID and is the answer not in the manual?
General| Power Supply | DC 12V |
|---|---|
| Wiring | 4-wire |
| Operating Voltage | DC 12V |
| Color | White |
| Display | LCD |
| Operating Temperature | -10°C to +55°C |
| Humidity | 10% to 90% |
| Material | Plastic |
| Installation | Surface mounting |
Steps for mounting the indoor monitor bracket and connecting the unit.
Procedure for detaching the outdoor camera bracket and front cover.
Securing the outdoor camera bracket and reattaching the bottom screws.
Connect indoor monitor terminals 7-11 to outdoor camera terminals 1-4, 7.
Connect outdoor camera terminals 5-6 to the electronic lock.
Connect indoor monitor power terminals to DC15V supply.
Connect outdoor camera terminals 1-7 to Indoor Monitor A terminals 7-13.
Link Indoor Monitor A terminals 1-4 to Monitor B and C terminals.
Connect indoor monitor power terminals to DC 15V.
Initiate conversation with CALL button; end with TALK button.
Use the UNLOCK button to release the door.
Press MONITOR to view the outdoor area for approximately 40 seconds.
Adjust brightness, chroma, ring, and talking volume using controls.
Add, delete, or re-program user cards for door unlocking.
Avoid high temperature, humidity, or proximity to TVs for the indoor monitor.
Use soft cloth, avoid wet hands, liquids, or physical impact.
Prevent illegible images from strong light or radio interference.
To Next Page
