D UserManual
QH-1085
Can be hung on the wal through the nail hole on the
back side.
2X1.5V AA batter operated
keep the code-matching button on the receiver pushed, and
push the button of the transmitter at the same time. Release
the code-matching button on the receiver as soon as the bell
rings, and then release the button of the transmitter
accordingly. In this case, the code matching of the doorbell
set is finished.
LED FLASHING INDICATOR
TUNES SELECTION SWITCH (16 tunes
selectalbe)
VOLUME SWITCH (low,medium
or high)
RING OPTION SWITCH:ring only,or LED
flash only,or combination of ring and flash
High Quality Loudspeaker
Can be put on the bable with the]
click-in base
Water proof push button with LED Indicator
Name plate
Wireless Digital Doorchimes
To Next Page
Need help?
General
