USER MANUAL
2. English
2.1. Safety Instruction
In this instruction manual WARNING, CAUTION, and NOTE are defined as
follows:
WARNING:Failure to do so may result in serious accidents, fire and
personal injury. These are mandatory!
CAUTION: Failure to do so may result in injury to the user or damage to
related objects. For your own safety, you should follow these
instructions!
NOTE: Describes a process that is important to the task at hand.
WARNING
When the unit is turned on, the soldering tip automatically heats up to
the last set temperature. There is a risk of burns on the surfaces!
The device is designed for brazing soft solder at different temperatures.
A different use is not permitted.
During operation and immediately after switching off, do not touch the
metallic parts on the tools, CAUTION! Burns!
Do not use the device near flammable substances and components.
Use a heat-resistant work surface and keep your workplace clean.
Solders, fluxes and heated materials can develop harmful properties
and should be vacuumed in a controlled manner. Do not breathe these
toxic fumes or gases and provide adequate ventilation.
Wear protective clothing (protective gloves, safety goggles, etc.) and
avoid contact of the soldering iron with skin and hair or other
Thank you for purchasing a QUICK SOLDERING STATION. Please read the
operating instructions before commissioning and keep them in a safe place
that is easily accessible to all users.
To Next Page
Loading...
