USER MANUAL
2.10.2. Assembly and change of the nozzle
1. Assembly：Select one befitting nozzle and insert it into the outlet’s
steel pipe. Press it with hand until the nozzle has been locked. It
can be used after the nozzle has been fixed reliably.
2. Change: Take the handle down from the holder after the nozzle has
cool down. There is a slot between the nozzle and the outlet’s steel
pipe. By the slot, put the handle on the disassembly plate of the
nozzle that is fixed at the holder. After that, fix the holder with one
hand and pull out the nozzle. Change another nozzle.
NOTE: The nozzle can be ordered by the custom.
CAUTION: Change the nozzle after it has cool down.
NOTE: After 500°high temperature aging，it will have slight yellowing
phenomenon, this phenomenon is normal, please be assured use!
To Next Page
Loading...