Quick BTQ2512012 User Manual

25
GB
BOW THRUSTER BTQ250 - BTQ300 IT GB - REV002A
WARNING: make sure that the power supply to the
electric motor is not switched on when maintenance
operations are carried out.
Quick
®
Bow Thrusters are made in materials that are resist-
ant to the sea environment: In any case, it is indispensable
to periodically remove salt deposits that form on the outer
surfaces to avoid corrosions and consequent system inef-
ficiency.
Dismantle once a year, following the points below:
• Keep the propeller (12 and 13) and the gearleg (10) clean.
• Paint the propeller and the gearleg with anti-vegetative
paint before each season.
WARNING
: do not paint the zinc anode (15), the seal-
ings and the propeller shaft Be careful not to allow
paint to penetrate in the “tracks” of the gearleg (10)
in which the propeller hub moves.
• Check the zinc anode (15) frequently.
• Replace the zinc anode before every season or when it is
more than half consumed.
• After any maintenance, make sure that the bolts (18) that
lock the flange (7) to the gearleg (10) are well tightened.
• After every maintenance, make sure that the propeller (12
and 13) is well tightened and that the bolts (1) locking the
electric motor (3) are tight.
• Make sure that all electrical connections are clean and
firmly fixed (28 and 29).
• Make sure that the batteries are in good condition.
POS. DESCRIPTION CODE
1 Motor mounting screw MBV1230MXCE0
2 Motor mounting washer MBR12X000000
3A Motor 6,5KW 12V EMFEL6512000
3B Motor 6,5KW 24V EMFEL6524000
3C Motor 8KW 24V EMFEL8024000
3D Motor 10KW 24V EMFEL1K24000
4 Key 6x6x25 MBH0606025X0
5 Half-joint MMSGM1900000
6 Even tension device PVPR70000000
7 Motor flange SLMMEM250000
8 O-Ring PGR041750000
9 Gearbox gasket PGRDEL250000
10 Gearleg MREM25000000
11 Key 6x6x40 MBH0606040X0
12 Starboard propeller PVEL25R00000
13 Port propeller PVEL25L00000
14 Self-braking nut M16 MBD16MXET000
15 Anode tip MMANBTQ25000
16 Anode tip mounting screw MBV0635MBCE0
17 Grower Ø10 MBG10X000000
18 Gearleg mounting screw MBV1050MXCE0
19 Clamp reversing contactor unit MMSTBTQ35000
20 Screw M5x06 MBV0506MTCT0
21 Grower Ø5 MBG05X000000
22 Washer Ø5 MBR051510X00
23 Screw M5x12 MBV0512MXCE0
24A Reversing contactor unit
350A 12V
ERBTQ1235000
24B Cassetta teleinvertitori
350A 24V
ERBTQ2435000
25 Carter spacer B MBTCB2600TMM
26 Fasteners carter
reversing contactor unit
PCCCBTQB0000
27 Fasteners carter
reversing contactor unit
PBD04STPN000
28 Negative reversing contactor SAECCCBTQNG0
29 Command wire SAECCCBTQCM0
MAINTENANCE

Quick BTQ2512012 Specifications

General

Brand	Quick
Model	BTQ2512012
Category	Outboard Motor
Language	English