EasyManua.ls Logo

Quickie Attitude - Crank Adjustment and Final Inspection; Crank and Pedal Adjustment Guide; Final Inspection and Troubleshooting

Quickie Attitude
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MK-100393 Rev. A
15
QUI C KI E ATTITUDE
O. CHECK PROPER CRANK(PEDAL) ADJUSTMENT
The default position of the crank is based on data which depicts the average best fit. If this is not suit-
able for you, please contact your authorized Sunrise Medical dealer. The hand crank (pedal) can be
adjusted for the user by an authorized Sunrise Medical dealer. When checking proper crank(pedal) fit,
please pay attention to the following guidelines.
1. The cranks must not touch the knee or thigh while pedaling, especially through bends.
2. The elbow should not completely extend when the crank handles are furthest away from the
body.
3. If you have poor seating stability, or weak trunk muscles, a suitable restraint must be used.
Please contact your authorized dealer.
P. INSPECT
After the installation of the Quickie Attitude, and with the product assembled and adjusted, it should
roll smoothly and easily. All accessories should perform smoothly. If you have any problems, follow
these procedures:
1. Review the order form and shipped items to make sure bike specifications match the wheelchair's
physical characteristics.
2. Review the troubleshooting chart at the beginning of this section.
3. If your problem persists, contact your authorized dealer. If you still have a problem after contact-
ing your authorized dealer, contact Sunrise customer service. See the Introduction Page for details
on how to contact your authorized dealer or Sunrise customer service.
VIII. USE A
ND MAINTENANCE

Other manuals for Quickie Attitude