Quicksilver MAX Sprint - Page 18

3“
COMPRESSION STRUTS
(40283)
TRAILING EDGE
WING TIP
ADDITIONAL CUT OUT
FOR THIS HOLE TO AID IN ASSEMBLY
OF LEADING EDGE OUTBOARD WIRES
CUT WITH
TEMPLATE
POP ALL 3 STRUTS INTO PLACE. DO NOT CUT FABRIC FOR BOLT HOLES
LEADING EDGE
COMPRESSION STRUT
BOLT HOLE IN FABRIC
CUT DURING CABLE INSTALL
COMPRESSION STRUT HOLE
IN WING FABRIC
BELLCRANK COMP. STRUT
(71020)
COMPRESSION STRUT ATTACHMENT
Section 4
14
Air-Tech, Inc