Need help?Do you have a question about the Quicksilver MAX Sprint and is the answer not in the manual?
General| Brand | Quicksilver |
|---|---|
| Model | MAX Sprint |
| Category | Aircrafts |
| Language | English |
Provides general guidance and important information for the wing assembly process.
Details the assembly of bellcranks and compression struts for wing components.
Illustrates the overall layout and key components of the wing assembly.
Instructions for installing the fabric covering onto the wing structure.
Lists all necessary tools and supplies required for airframe assembly.
Details AN and Grade 5 bolts, their specifications, and proper tightening procedures.
Details the critical use of castle nuts and cotter pins for securing rotating components.
Detailed instructions for assembling the aircraft's rudder component.
Instructions for assembling the aircraft's elevator component.
Guide for assembling the horizontal stabilizer for the aircraft.
Details attaching forward channels and the nose wire to the root tube.
Instructions for assembling the trailing edge of the aileron.
Instructions for assembling the leading edge of the aileron.
Details the process of attaching the fabric cover to the aileron structure.
Instructions for assembling the tires and wheels for the trike.
Details the assembly of the nose gear component for the trike.
Details the assembly of foot pedals and their connection to rudder cables.
Instructions for assembling the throttle control mechanism.
Details the assembly and connection of the aircraft's control stick.
Details the process of connecting the aircraft wings to the trike assembly.
Instructions for assembling and installing the kingpost structure.
Details the attachment of the tail group to the main airframe.
Provides steps for adjusting the ailerons for proper control surface alignment and function.
Details how to check and adjust the horizontal stabilizer incidence for flight stability.
Details the procedure for adjusting the elevator control system.
Highlights critical safety warning labels related to the propeller arc.
Template for cutting out rib ends for proper fitment.
Template for cutting wing compression struts.
To Next Page