Tire (W752)
Inner Tube (W8-353)
Sandpaper or file, deburr the mating area of the
wheel halves. Take the two wheel halves and
insert into tire. Notice the “Notched” area. This
is the outlet for the Inner Tube valve stem.
This is the typical tire / wheel assembly.
This assembly uses the Azusa nylon 5” rims with
5” tire and tube. If your kit is supplied with
larger wheels / tires only one of this assembly
is supplied for the nose wheel.
See assembly instructions supplied with
optional larger wheel kit.
optional larger wheel kit.
To Next Page
Loading...