Quicksilver MAX Sprint - Page 26

UP
2“
LEADING EDGE SPAR
1/4 LOCKNUT
W/ WASHERS
WASHER
1/4” X 2-1/2” GRADE 5
(10423) THREADS INTO
COMPRESSION STRUT
AN4-30A
(10270)
Not a cut out
for clarity only
CAREFULLY HEAT CUT THIS HOLE
USING TEMPLATE AS GUIDE
1-3/4” SADDLE
(20290)
WING WIRES / COMPRSSION STRUTS CON’T .
ANTI-DRAG WIRE (71032)
OTHER END IN STEP 7
THIS WIRE PASSES UNDER
COMP STRUTS
1“ X 1/4” NYLON WASHER
(20346)
L. E. OUTBOARD
UPPER WIRE
Section 4
22
Air-Tech, Inc