EasyManua.ls Logo

QuietCool AFG PRO-2.0 - User Manual

QuietCool AFG PRO-2.0
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DO NOT THROW AWAY!
SERIAL NUMBER FOR FAN IS LOCATED ON THE BACK COVER OF THE OWNER’S GUIDE.
LEAVE WITH HOMEOWNER
OWNER’S GUIDE
PRO ATTIC GABLE FAN
!
AFG PRO-2.0
Question and Answer IconNeed help?

Do you have a question about the QuietCool AFG PRO-2.0 and is the answer not in the manual?

Summary

System Overview

Introduction

Introduces the QuietCool Attic Fan and its benefits for attic cooling.

Features

Lists the key features of the Pro Attic Gable Fan, including motor, mounting, and warranty.

System Venting Requirements

Details the importance of attic venting and provides a chart of common vent types and their capacities.

Getting Started: Important Safety Information

General Safety Information

Provides essential safety guidelines for operating and maintaining the QuietCool Attic Fan.

Warnings

Highlights critical warnings regarding impeller safety, cord handling, and proper usage.

Installation

Installing Attic Gable Fan

Explains how to mount the AFG fan using flush, wide, or odd mount methods to existing vents.

Installing AFG Vent Covers

Details how to install the included vent covers to prevent air backdrafting around the fan housing.

Wiring

Thermostat Wiring

Provides instructions for wiring the thermostat for the QuietCool Attic Gable Fan.

Remote Thermostat Wiring

Guides on wiring the fan with a remote thermostat, including junction box setup.

System Operating Instructions

Setting the Thermostat

Explains how to adjust the thermostat temperature and its fire fuse safety feature.

Using Your QuietCool Attic Fan

Recommends thermostat settings for summer cooling and winter ice damming prevention.

Attic Gable Fans Limited Warranty

Warranty Limitations

Details exclusions and conditions that void the warranty, including improper installation and misuse.

Motor Replacements

Specifies conditions and qualifications for motor replacements under warranty.

Other Warranty Conditions

Outlines the entire warranty agreement, liability limitations, and state law governing it.

Warranty Process Initiation

Instructs users on how to obtain service under the warranty by contacting customer support.

Fan Serial Number Information

Summary

System Overview

Introduction

Introduces the QuietCool Attic Fan and its benefits for attic cooling.

Features

Lists the key features of the Pro Attic Gable Fan, including motor, mounting, and warranty.

System Venting Requirements

Details the importance of attic venting and provides a chart of common vent types and their capacities.

Getting Started: Important Safety Information

General Safety Information

Provides essential safety guidelines for operating and maintaining the QuietCool Attic Fan.

Warnings

Highlights critical warnings regarding impeller safety, cord handling, and proper usage.

Installation

Installing Attic Gable Fan

Explains how to mount the AFG fan using flush, wide, or odd mount methods to existing vents.

Installing AFG Vent Covers

Details how to install the included vent covers to prevent air backdrafting around the fan housing.

Wiring

Thermostat Wiring

Provides instructions for wiring the thermostat for the QuietCool Attic Gable Fan.

Remote Thermostat Wiring

Guides on wiring the fan with a remote thermostat, including junction box setup.

System Operating Instructions

Setting the Thermostat

Explains how to adjust the thermostat temperature and its fire fuse safety feature.

Using Your QuietCool Attic Fan

Recommends thermostat settings for summer cooling and winter ice damming prevention.

Attic Gable Fans Limited Warranty

Warranty Limitations

Details exclusions and conditions that void the warranty, including improper installation and misuse.

Motor Replacements

Specifies conditions and qualifications for motor replacements under warranty.

Other Warranty Conditions

Outlines the entire warranty agreement, liability limitations, and state law governing it.

Warranty Process Initiation

Instructs users on how to obtain service under the warranty by contacting customer support.

Fan Serial Number Information

Overview

The QuietCool Pro Attic Gable Fan is an advanced attic fan designed to cool and ventilate attic spaces, thereby reducing heat buildup in the house and protecting HVAC equipment and the home's structure. It is suitable for year-round use, with adjustable settings for different seasons.

Function Description:

The primary function of the QuietCool Pro Attic Gable Fan is to exhaust hot air from the attic, replacing it with cooler outside air. During summer months, attics can reach temperatures significantly higher than the outside air, which in turn heats up the living space below. By operating the attic fan, the attic temperature can be brought closer to the outside ambient temperature, reducing the load on air conditioning systems and making the home more comfortable. In winter, the fan helps to ventilate the attic space, reducing moisture levels and preventing ice damming, which can cause significant damage to the roof and home structure due to drastic temperature differences between outside air and the air inside the home. The fan features a high-efficiency two-speed PSC motor, allowing for flexible operation based on cooling needs.

Usage Features:

The QuietCool Pro Attic Gable Fan is designed for straightforward use and control.

  • Thermostat Control: The fan comes with a standard adjustable thermostat, pre-wired on high speed for initial testing. This thermostat allows users to set a desired temperature range, typically between 60°F and 120°F. The fan will automatically turn on when the attic temperature reaches or exceeds the set temperature. To adjust the thermostat setting, a screwdriver can be used to twist the dial.
  • Two-Speed Operation: The fan offers two speeds (high and low) for varying ventilation requirements. The wiring instructions provide guidance on how to hard-wire the fan to operate at either high or low speed, depending on the user's preference or local building codes.
  • Fire Fuse: An important safety feature is the integrated Fire Fuse within the thermostat. This fuse is designed to automatically shut off the attic fan if it detects a temperature above 182°F (83°C) in the attic. This mechanism is crucial in the event of a house fire, as it helps prevent the spread of flames by stopping the fan from drawing air and fueling the fire.
  • Seasonal Operation:
    • Summer Months: For effective cooling during warmer months, it is recommended to set the thermostat between 80°F and 100°F (27°C and 38°C). This helps maintain attic temperatures close to the outside temperature, reducing heat transfer into the living space.
    • Winter Months: To prevent ice damming and reduce condensation, the thermostat should be set to 60°F (16°C). This setting ensures adequate ventilation to keep moisture levels low and attic temperatures consistent with outside temperatures.
  • Remote Thermostat Wiring: For installations where the thermostat needs to be mounted in a location optimal for temperature readings, away from the fan itself, instructions are provided for remote thermostat wiring using a junction box and a 2-wire Romex cable.

Maintenance Features:

While the manual does not explicitly detail routine maintenance, it emphasizes proper installation and safety to ensure longevity and performance.

  • Durable Construction: The fan features a powder-coated steel housing and an integrated hand guard, contributing to its durability and protection.
  • Integrated Mounting Tabs: The fan includes integrated mounting tabs with anti-vibration pads, which simplify installation and help reduce operational noise and wear.
  • Venting Requirements: Proper venting is crucial for the fan's efficient operation. The manual provides guidelines for net free vent area (1 square foot per 750 CFM) and recommends 2 to 4 square feet of inlet vents per fan. Insufficient venting can hinder performance, and the manual includes a chart of common vent types and their venting capacities to help users assess and potentially improve their attic's ventilation.
  • Professional Installation Guidance: For wiring, it is strongly recommended that a licensed electrician perform the installation, adhering to local building and electrical codes and NEC guidelines. This ensures safe and correct electrical connections, which is vital for the fan's operation and warranty.
  • Warranty: The product comes with a 15-year warranty for the QuietCool motor fan assembly (including the motor and fan blade) and a 1-year warranty for all other components (grilles, housings, damper boxes, ducts, controls, and accessories). This extensive warranty period reflects the manufacturer's confidence in the product's quality and durability, while also covering potential manufacturing defects. To initiate a warranty claim, users are instructed to contact their dealer or QC Manufacturing, Inc. customer service and obtain a Return Merchandise Authorization (RMA) form.
  • Serial Number Importance: The serial number for the fan is located on the back cover of the owner's guide and is essential for warranty purposes. Users are advised to retain this information for their records.

QuietCool AFG PRO-2.0 Specifications

General IconGeneral
TypeWhole House Fan
Noise Level1.5 Sones
Fan Diameter20 Inches
Voltage120V
Motor SpeedVariable
Power Consumption120 Watts
MotorPermanent Split Capacitor (PSC)
Warranty15 Year Limited

Related product manuals