7
3.4 SMART CONTROL HUB - LED INDICATORS
• POWER Indicator
• The Power LED indicator will always be lit when the Hub is connected to Power.
• If this LED is not lit, check the power source.
• Temp and Hum | Timer Indicator
• This LED indicator will light up as shown below:
• Blinking: Timer Mode Active
• Solid: Smart Mode Active
• Test Indicator
• The Test LED indicator will light up as shown below when the Test button is
pressed:
• Two Speed Fan: blink three times every 2 seconds on HIGH, blink
once every 2 seconds on LOW
• Three Speed Fan: blink three times every 2 seconds on HIGH, blink
twice every 2 seconds on MED, blink once every 2 seconds on LOW
• Pair Indicator
• The Pair LED indicator will blink when making pair operations. Please see
SETTING UP YOUR FAN on page 12 for details on pairing.
• The indicator will be lit up solid when a device is connected via Bluetooth.
• The indicator will not be lit when no pairing operations are being made or no
device is connected.
WELCOME
INSTALLATION
WIRING OPERATION
WARRANTY
To Next Page
Loading...
