www.quikoitaly.com
4. POSITIONING OF GEAR MOTOR
Position the gear motors (Fig. 3) on
the great plate, using the appropriate
screws supplied.
The right coupling between rack and
pinion may be carried out by fixing
the small plates to the great plate,
through the eyelets associated.
Unlock the gear motors, through
appropriate release lever (Fig. 4).
Fig.3
Fig. 3
5. MANUAL OPENING
Fig. 4
In case of a power blackout it is possible to operate the gate in manual
mode, as shown in Fig. 4.
To unlock the engine insert the key into the seat and rotate clockwise until it
stops (about 5 laps). To restore the engine block, rotate the key
counterclockwise to its initial position.
To Next Page
Loading...
