CHRONOGRAPH
Push-button A
Push-button B
Chronograph : Accumulated timing
Example :
1- Start : start timing
2- Stop : e.g. 15min 5s following 1-
3- Restart : timing is resumed
4*- Stop : e.g. 13mn 5s following 3-
= 28mn 10s
(the accumulated measured time in shown)
5- Reset :
The three chronograph hands are returned to
their zero position.
Please note
* Following 4-, the accumulation of the timing can be
continued by pressing push-button A.
(Restart/Stop/Restart/Stop, ...)
1-
2-
3-
4-
5-
Minute counter
Hour counter