Need help?Do you have a question about the Quilt EZ Professional Butler and is the answer not in the manual?
Identifies and describes the key components and ports of the Butler motor box.
Details the touch screen display, ports, and buttons of the tablet used with Butler.
Step-by-step instructions for operating the machine manually using the Butler system.
Explains how to use the tablet's interface, including buttons, desktop, and shortcuts.
Covers starting/stopping the robot, tracing vs. stitching, and stitch controller.
Manages stitch per inch (SPI) and stitch regulation for precise quilting.
Allows setting angles and nesting patterns for complex quilt designs.
Covers repeating, spacing, offset, and auto-fill for pattern arrangement.
Details repositioning, alignment, rotation, and resizing of patterns.
Describes traditional crop, appliqué inside, and appliqué outside methods.
Covers loading, importing, exporting, and tagging patterns.
Guides on creating, opening, and saving quilt layouts and pattern boxes.
Instructions for recording free motion designs and creating appliqué pattern boxes.
Covers system information, robot updates, factory defaults, and customer support.
Explains settings like min speed, margin, grid spacing, and lock stitches.
Details machine type, test functions, and advanced adjustments for performance.
Provides step-by-step tutorials for quilting blocks and pantograph patterns.
Explains key terms used throughout the manual, such as Layout, Pattern Box, and Quilt Area.
Chart to help select the proper machine type based on cable configuration.
To Next Page
General