Quin Design McQ - Final Helmet Fitting and Adjustment

Page 11
Final Fitting
The helmet must be worn in correct and level position
(Figure C). It must not be worn tilted forward (Figure D) or
worn tilted backwards (Figure E).
With the chin straps properly and securely fastened,
check for the nal t. Grab the front of the helmet, push
and rotate towards rear. Then lift the rear of the helmet,
push forward and rotate the helmet off. You should not
be able to remove the helmet in either of these cases. If
necessary, tighten the straps again.
With the straps fastened, you should not be able to pull
the helmet off your head in any direction.
For more detailed instructions or information, please refer
the Quin App and/or visit www.quin.design
For instruction regarding the the Quin App and its
features, refer to Quin App’s in-built digital guide.
Figure C Correct Figure D inCorrect Figure E inCorrect
If the helmet does not t properly, do not use the
helmet.
warning
Note