EasyManua.ls Logo

Quincy Compressor PLT-7.5 User Manual

Quincy Compressor PLT-7.5
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
This manual contains important safety information and should be made
available to all personnel who operate and/or maintain this product.
Carefully read this manual before attempting to operate or perform
maintenance on this compressor
Manual No. 50161-105
March 2008 Edition
QTQT
QTQT
QT
® ®
® ®
®
& PL& PL
& PL& PL
& PL
TT
TT
T
®®
®®
®
IndustrialIndustrial
IndustrialIndustrial
Industrial
& Air Master Series& Air Master Series
& Air Master Series& Air Master Series
& Air Master Series
2 Stage Compr2 Stage Compr
2 Stage Compr2 Stage Compr
2 Stage Compr
essorsessors
essorsessors
essors
Instruction Manual
Question and Answer IconNeed help?

Do you have a question about the Quincy Compressor PLT-7.5 and is the answer not in the manual?

Quincy Compressor PLT-7.5 Specifications

General IconGeneral
BrandQuincy Compressor
ModelPLT-7.5
CategoryAir Compressor
LanguageEnglish

Summary

Quincy QT PLT Industrial Air Master Series Compressors

Warranty Statement and Terms

True Blue Warranty Details

Details of the Quincy True Blue Warranty coverage, including periods and terms.

Warranty Limitations and Exclusions

Conditions and situations not covered by the warranty, and seller's liability limitations.

Safety First

Understanding Safety Hazard Levels

Explanation of DANGER!, WARNING!, and CAUTION! hazard level definitions.

General Safety Precautions

Key safety rules and precautions for operating and maintaining the compressor.

Compressor Specifications

Installation: Receiving Delivery and Inspection

Inspect for Shipping Damage

Procedure for inspecting compressor equipment for damage during shipment.

Installation: Location and Environmental Requirements

Proper Installation Location Criteria

Guidelines for clean, ventilated, and temperature-appropriate installation areas.

Environmental and Safety Considerations

Warnings regarding ambient temperatures, toxic atmospheres, and noise levels.

Installation: Electrical Supply Requirements

Electrical Installation Standards

Ensuring compliance with electrical codes, qualified personnel, and proper wiring.

Installation: Wiring and Piping Schematics

Installation: Mounting and System Components

Compressor Unit Mounting Procedures

Guidelines for anchoring or isolating compressor units on floors or pads.

Installation: Drive Pulleys and Sheaves

Guards and Safety Features

Requirements for mechanical guards and their importance for safety.

Start-Up and Operation: Pre-starting Checklist

Pre-Start Safety Checks

Critical safety warnings and checks before connecting to power.

Installation Readiness Checks

Checking tools, lubricant, alignment, guards, and connections before operation.

Start-Up and Operation: Initial Procedures

Connecting to Power Source

Connecting the unit to the power source after completing pre-start checks.

Checking Rotational Direction

Verifying correct motor and fan rotation direction.

Oil Pressure Adjustment

Procedure for checking and adjusting oil pressure on lubricated models.

Start-Up and Operation: Daily Checklist

Maintenance and Lubrication: Stopping for Service

Safe Shutdown Procedures

Steps for safely stopping the compressor for maintenance, including lockout/tagout.

Maintenance Schedule Overview

Maintenance and Lubrication: Lubrication Details

Maintenance: Pulley Sheave Alignment and Belt Tension

Maintenance: Pressure Switch Adjustment

Troubleshooting: Common Issues and Causes

Low Discharge Pressure Troubleshooting

Identifying potential causes for low discharge pressure in the compressor.

Water in Crankcase (Milky Lubricant)

Troubleshooting milky lubricant, often due to condensation or improper operation.

Troubleshooting: Drive Belts, Oil, and Pressure Issues

Troubleshooting: Intercooler, Overheating, and Knocks

Troubleshooting: Oil Consumption, Current Draw, and Stalls

Related product manuals