Quincy Compressor QOF 30 User Manual

Section V - Operating instructions
Quincy Compressor 79
3. Check that condensate is discharged automatically from the condensate drain
outlet during operation.
NOTICE!
The dew point will deviate from nominal when the nominal conditions are exceeded.
If the dew point remains too high or unstable, consult section Problem solving.
Stopping
Procedure
1.Pressthestopbutton(2).
2.Closetheairoutletvalve.SeesectionIntroduction.
3.Switchoffthevoltage.
4.Openthemanualcondensatedrainvalve.
Taking out of operation
Procedure
1. Stop the compressor and close the air outlet valve.
2. Switch off the voltage and disconnect the compressor from the mains.
3.Depressurizethecompressor.Openthecondensatedrainvalve.
4.Shutoffanddepressurizethepartoftheairnetwhichconnectedtotheoutletvalve.
Disconnectthecompressorfromtheairnet.
5.Disconnectthecondensatepipingfromthelocalcondensatedrainsystem.

Quincy Compressor QOF 30 Specifications

General

Model	QOF 30
Phase	3
Max Pressure	175 PSI
Cooling Method	Air Cooled
Voltage	460V
Number of Stages	2
Pump Type	Rotary Screw