inlet valve and close it before turning the vacuum pump
,- .
off. If
for any reason the inlet valve did not close
tightly, the manual shutoff valve would prevent
lubricant from being sucked back into the vacuum
system.
Stoppin~ the Vacuum PumR-Emer~encv O~eration
Push the “stop” button or switch off the power at master
disconnect panel.
Page 42
—..——...”—-----..--.—
—. .—— ....———--———---
-7.—.-. —. —. ——.- ---
——.. .
.. —- ..—..—
-—...——
To Next Page
Loading...
