EasyManuals Logo

Quincy Compressor QSVI Series User Manual

Quincy Compressor QSVI Series
73 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #49 background imageLoading...
Page #49 background image
shipment. Additional sample bottles may be purchased
j.) Hours on Machine - This is the total number of hours
through your distributor.
on the vacuum pump hour meter.
! CAUTION!
k.) Sample Date - The date the sample was taken from
Do not mix QUINSY~ with any other fluid.
the vacuum pump.
Failure to follow these recommendations will cause
severe fluid breakdown, resulting in the fo~ation of 1.) Evaluation - This is a brief statement made by the
heavy varnish and sludge throughout the system.
technician performing the actual fluid analysis. This
This will result in clogged fluid separators, coolers
statement addresses the condition of the fluid and filter.
and internal fluid passages in the vacuum pump.
This statement will also note any problems that need
Warranty will be void.
attention.
m.) Physical Properties Results - See figure 6-1 for
Understanding the Fluid Analysis Renort
parameters.
Figure 6-1 is a representation of the fluid analysis
n.) Spectrochemical Analysis - See figure 6-2 for
report returned after a sample has been submitted for
parameters.
analysis. Figure 6-2 is a list of the parameters of the
fluid tested.
a.) Report Date - The date that the fluid was analyzed
b.) Report Number - The assigned number to this report
NOTE: Items (c) through (k) is information provided
by the service person supplying the fluid for analysis.
Incomplete or incorrect information will affect the
accuracy of the report.
c.) Customer Address - The name and mailing address
of the person to whom this report belongs. This is the
information on the sample bottle.
d.) Customer - The owner of the sampled unit.
e.) Compressor Manufacturer - Brand of compressor
sampled.
f.) Fluid Type - This should always be QUINSYI@’or
QUINSYN P fluid.
g.) Serial Number - The serial number of the Quincy
vacuum pump from which the sample was
taken.
h.) Model Number - The model number of the Quincy
vacuum pump.
i.) Hours on Fluid - These are the actual hours that the
QUINSW has been in the unit since the last fluid
change.
Page 45
--.. --.-—

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quincy Compressor QSVI Series and is the answer not in the manual?

Quincy Compressor QSVI Series Specifications

General IconGeneral
BrandQuincy Compressor
ModelQSVI Series
CategoryWater Pump
LanguageEnglish

Related product manuals