Why is my Quinton Treadmill popping during grade change?
If your Quinton Treadmill is popping during grade changes, it is likely due to faulty elevation chain alignment. Adjust the alignment of the sprockets.
How to fix E105 error on Quinton Treadmill?
To resolve the E105 error code on your Quinton Treadmill, re-initialize the NVRAM: 1. Press Stop, Faster, and Slower to enter Service Mode. 2. Press Stop and Cool Down to reinitialize. 3. Press Clear. 4. Reconfigure the controller (see "Configuring the Controller" on page 4-26). If the error persists, replace the controller.
What to do for E201 error code on Quinton Treadmill?
To resolve the E201 error code on your Quinton Treadmill: 1. Enter service mode. 2. Calibrate POT. 3. If the error persists, replace POT. 4. If the error still persists, replace the AC Drive Module.
General| Display | LCD |
|---|---|
| Maximum Speed | 12 mph |
| Incline Range | 0 to 15% |
| Speed Range | 0.5-12 mph |
| Power Requirements | 120V |
To Next Page
