Quintum Tenor AF User Manual

VoIP Switch
Tenor AF
®
P
r
o
d
u
c
t
G
u
i
d
e
P
/
N
4
8
0
-
0
0
8
4
-
0
0
-
1
2
Tenor and Quintum are registered trademarks. Quintum Technologies, Inc., PacketSaver, Risk Free VoIP,
The Perfect Fit, are trademarks of Quintum Technologies, Inc.
NOTE:The current release of the Tenor Monitor does not support the Tenor AF
Series.
This unit contains new hardware, which requires newer software. This software was installed
on the unit prior to leaving the factory.
If you must downgrade the software in this unit, please visit http://ae.quintum.com/support/
rohs/ for a list of latest software patches that support this new hardware. Loading unsup-
ported software will render this unit inoperable and will require physical access to this unit
for recovery.
NEW HARDWARE SUPPORT

Quintum Tenor AF Specifications

General

Brand	Quintum
Model	Tenor AF
Category	Switch
Language	English

Summary

Chapter 1: Overview

What is the Tenor AF?

Describes the Tenor AF product, its purpose, and role in VoIP.

Features

Capabilities

Tenor AF Call Paths

Chapter 2: Hardware Components

Hardware Description

Describes the hardware components of the unit.

Specifications

Chapter 3: Installation

Installation

Provides general instructions for installing the unit.

Connect to Phone/FXS Interface

Connect to Line/FXO Interface

Connect to Ethernet LAN

Power up the System

Instructions for powering up the system.

Login without the PC's COM port/Obtain IP Address from Ethernet

Login through the PC's COM port (if required, see note)

Chapter 4: Diagnostics/Maintenance

Common Symptoms/Problems

Lists common problems and troubleshooting steps.

Monitor Alarms

Explains how to view and interpret system alarms.

Perform Maintenance

Procedures for performing maintenance tasks.