Quirky Bubba Sienna Cot - Sienna Cot Assembly Steps; Step 1: Attaching Side Panels to Base

10 pages

To Next Page

To Previous Page

Start by attaching parts 1 and 3

together using 2x screws, secure

the parts together by inserting the

screws through the holes in part 1

and into part 3.

PART 1

PART 3

Make sure to line up the letter

A on part 1 to the letter A on

part 3.

PART 3

PART 2

Repeat Step 1 on the other side

of the Cot, securing Part 2 to

Part 3. Screw 2 x screws (using

the L key) through Part 2 into

the screw holes provided in

Part 3.

Make sure to line up the letter

B on part 2 to the letter B on

part 3.