Quirky Bubba Sienna Cot - Step 2: Connecting Front;Back Panels

10 pages

To Next Page

To Previous Page

PART 1

Attach part 1 to part 4

using 2x screws, screwing

them through part 1 into

the screw holes provided

in part 4.

PART 2

Repeat Step 3 on the other side of

the Cot, securing Part 2 to Part 4.

Screw 2 x screws (using the L key)

through Part 2 into the screw holes

provided in Part 4.

PART 4

Make sure to line up the letter

D on part 1 to the letter D on

part 4.

PART 4

Make sure to line up the letter

C on part 2 to the letter C on

part 4.