Quirky Bubba Sienna Cot - Step 3: Securing Bottom and Base

10 pages

To Next Page

To Previous Page

Place the cot on its side like in

the photo.

Then insert part 6 in at the

bottom of cot and secure to

parts 1 and 2 using 4x screws

through the holes provided.

PART 6

PART 5

Insert Part 5 into

the Cot, resting on

the mattress base

holders in each

corner of the cot.

Finally screw in part 3 and 4

into part 6 using 2x screws

through the screw hole at

the bottom of the cot on

either sides.