Quirky AROS User Manual

AROS|
 PREPARETHEAIRCONDITIONER
Attach the top mounting rail to the air conditioning unit
using  type A screws.
Attach right and le panel clips to the unit by sliding them
into place.
le right
 PREPAREYOURSTANDARDDOUBLEHUNGWINDOW
Cut the window sash seal to the proper length for your
window. Remove the seal’s backing and adhere it to the
underside of the window sash.
Install right and le extensions by sliding them over the
top and bottom mounting rails on each side of the unit. Pull
fabric panels from outside edges of the extensions toward
the unit, then hook onto the panel clips to secure.
 INSTALLTHEAIRCONDITIONERINTHEWINDOW
Place Aros on the sill with the bottom mounting rail against
its back edge.
Center it and close the window securely behind the
top mounting rail.
• Arosshouldbelevelorslightlytiltedoutside
• Usealevelabouta/bubblewillbethecorrectcaseslant
totheoutside

Quirky AROS Specifications

General

Type	Window air conditioner
Air filter	Yes
Number of speeds	3
Air conditioner functions	Cooling
Product color	White
AC input voltage	115 V