AROS|
NOTE The default temperature reading on the display is degree
Fahrenheit (°F). To change the display to degree Celsius (°C),
press Temperature Increase and Temperature Decrease at the
same time and hold for 3 seconds. Repeat the process to change
back to degree Fahrenheit (°F).
POWER
Turns air conditioner on and off. When turned on,
the display will show the room temperature.
MODE
Use to set the air conditioner to Cool, Eco, or Fan-only mode
FANSPEED
Use to set the fan speed to High, Med, or Low on the unit
TEMPERATUREINCREASE/DECREASE
Use up and down arrows to set temperature
when in Cool or Eco mode
DISPLAY
Shows the room temperature. Shows the set temperature
while setting the temperature in Cool or Eco modes.
ABOUTTHECONTROLSONTHEAIRCONDITIONER
Lights will illuminate next to each option when activated
to indicate the selected settings.
OPERATING INSTRUCTIONS
ABOUTSMARTTECHNOLOGY
Aros has smart features that extend its functionality. It can be
controlled from the Wink app on your mobile device and set to
gather information about your schedule, location, usage, and
more—to help automatically and efficiently maintain the perfect
temperature for your home.
For more information, download and launch the Wink app on
your mobile device then follow its instructions to connect.
To Next Page
Loading...
Need help?
General