To Next PageTo Next Page
Need help?Do you have a question about the Quorum Windmill 96015 Series and is the answer not in the manual?
Turn off power, comply with codes, use qualified electrician.
Ensure proper location, secure support structure, use approved hardware.
Do not insert objects into rotating blades, use correct controls, check connections.
Secure hanger bracket plate to building joist using provided wood screws and washers.
Slide downrod through canopy/cover, feed safety cable/wires, attach downrod to motor yoke with set pin and clip.
Secure 5 blade arms to motor housing and blade circle using arm screws and lock washers.
Place fan motor with blades into hanger bracket, rotating ball to engage tab for locking.
Secure safety cable to ceiling joist with screw and washer for fall prevention.
Use wire nuts and tape for secure connections; ensure no loose wires or strands.
Connect black to black, white to white, and copper ground to green ground wires.
Check circuit breaker, all connections, and remote control distance (max 30 ft).
General