PRODUCT DESCRIPTION
1
IR Sensor
To receive IR signal from the remote control.
2
ACT (Blue & Red LEDs)
Blue LED indicates operation and Red LED indicates standby.
Blue LED flashes each time the remote control's button is pressed.
Blue LED flashes continuously during booting or software update by USB.
Blue LED will stay ON if the receiver has an error. If this happens, please turn the power OFF/ON.
3
REC (Red LED) (Optional Function)
It will be ON to show the receiver is recording.
4
Smart Card Reader
Insert smart card here.
Front Panel
To Next Page
Need help?
General
