Qvis CORTEX User Manual

®
RANGE
CORTEX NVR
INSTALLER’S QUICK SETUP GUIDE
For full instructions see the Users Guide found on the USB pen drive provided with the NVR
More detailed instructions on how to operate
your NVR are included in the Quick Users Guide,
which is on the setup USB pen drive included.
We refrain from printing these large manuals in
an effort to limit our impact on the environment.
BEFORE INSTALLING ANYTHING WE STRONGLY RECOMMEND THAT YOU CONNECT YOUR CAMERAS TO YOUR DVR AND TEST YOUR
SYSTEM FIRST. WE CHECK EVERYTHING TO MAKE SURE IT IS WORKING WHEN IT LEAVES US BUT VERY OCCASIONALLY THINGS FAIL AND
IT IS BETTER TO KNOW NOW THAN AFTER YOU HAVE FITTED EVERYTHING!
NVR Power
Cortex NVR
1. DEVICE CONNECTIONS
STILL NEED HELP?
Then speak to our engaging technical team via our
webchat service found upon our website:
www.adata.co.uk
or if you prefer to call: (023) 92488302
Look for this webchat
bubble on our website
to connect to one of
our technical team
members.
Output to TV or Monitor
Power Adaptor
HDMI/VGA/RCA
Connect the
mouse to the
USB socket
1.
3.
Ethernet Connection
IP Camera
PoE Switch
Ethernet connector
to POE Switch
POE Switch
to NVR
2.
Connect camera’s
ethernet port to ethernet
cable.
Power Adaptor
Power to
POE Switch
Connect camera to POE
switch to provide camera
with power.
4.
Complete Connection
Setup
Connect peripheral
devices to NVR and
provide power.
Connect POE Switch to
ethernet port at the rear
of the NVR.
Ethernet Connection

Qvis CORTEX Specifications

General

Brand	Qvis
Model	CORTEX
Category	Network Hardware
Language	English

Summary

Device Connections

Ethernet Connection

Connects the camera's ethernet port to an ethernet cable for network connection.

PoE Switch Connection

Connects the camera to the PoE switch to provide the camera with power.

NVR Connection

Connects the PoE switch to an ethernet port at the rear of the NVR.

Peripheral Device Setup

Connects peripheral devices to the NVR and provides them with power.

IP Camera Setup

Access System Settings

Navigate to NVR configuration and parameters by right-clicking and selecting 'Settings Login'.

Video Control Panel Login

Enter default username 'admin' and password 'admin' to access the Video Control Panel.

Navigate to IP Camera Menu

Click the 'Settings' button and then select the 'IP Cameras' option from the menu.

IP Camera Setup Menu

Select 'IP Cameras: Setup, Add, Remove and Rename' to manage connected cameras.

Configure IP Cameras

Define NVR controls for IP cameras, including IP address, login details, and search.

Video Quality and Motion Settings

Adjust video quality and motion sensor settings for each IP camera.

Configuring IP Cameras

Apply Settings to All Cameras

Option to apply uniform video quality and motion settings to all cameras simultaneously.

Camera Identification Details

View details like Serial Number, Name, and IP Address for configured IP cameras.

Covert Camera Designation

Mark cameras as covert, restricting viewing access to users with sufficient privilege.

Video Quality Adjustment

Set video quality levels for IP cameras such as Best, Better, Normal, Good, and Fair.

Motion Sensitivity Configuration

Set motion detection sensitivity to Max, Med, Min, or Off for IP cameras.

Save or Reject Changes

Confirm configuration changes with 'Accept Changes' or discard with 'Reject Changes'.