QWNET CPE5450 - User Manual

1
CPE5450
/CPE5450 Master/CPE5450 Slave /CPE5450CD/CPE5450AP/CPE5450FIT/CPE80R/CPE5300/1200AP
User Manual
Ver1.3
Jul2019

Product pictures
 
 
SCPE(SlaveCPE) MCPE(MasterCPE)

Application:Point‐to‐Point



Summary

Specifications

Hardware Specifications

Details on the device's hardware components, ports, and antenna.

Firmware Specifications

Details on the device's operation modes and network protocols.

Preparation for Installation

Verify CPE Kit Readiness

Verify Device Communication (Router & PC)

Steps to confirm device communication using a router and PC.

Light Status Indicators (Router & PC)

Ping Router IP Address

Verify Device Communication (PC Only)

Steps to confirm device communication using only a PC.

Light Status Indicators (PC Setup)

Ping Master CPE IP Address

Ping Slave CPE IP Address

Application: Wireless Video Transmission

Single Camera Setup

Guide for connecting a single IP camera wirelessly.

Multiple Camera Setup

Wi-Fi Repeater Functionality

Warnings and Mounting

Reset Button Warning

Critical information about the reset button's behavior and potential issues.

QWNET CPE5450 Specifications

General

Wireless Speed	Up to 300Mbps
Maximum Data Rate	300 Mbps
Ethernet Ports	1 x 10/100 Mbps
Operating Modes	Access Point, Client, Repeater
Security	WEP, WPA, WPA2
Power Supply	DC 12V/1A