To Next PageTo Next Page
Need help?Do you have a question about the R-Can Sterilight S12Q and is the answer not in the manual?
Warns about UV light causing burns to eyes and skin; never look directly at illuminated UV lamp.
Guidance on preparing the unit, mounting it, and initial setup steps.
Instructions for making water connections, using Teflon tape, and verifying for leaks.
Steps for installing the UV lamp and flushing the system before first use.
Detailed steps for safely replacing the UV lamp, including handling precautions.
Procedures for cleaning or replacing the quartz sleeve to maintain water quality.
Instructions for cleaning or replacing the UV sensor for accurate monitoring.
Explains the audible alarm and indicator lights for lamp failure.
Details the LED status indicators (Green, Yellow, Red) for UV intensity.
Describes the function of the solenoid output for automatic water flow control.
Outlines the terms, conditions, exceptions, and exclusions of the product warranty.
Addresses causes and remedies for reduced water pressure, such as clogged filters.
Provides solutions for high bacteria counts, including lamp replacement and water quality checks.
Explains causes and solutions for warm product water and milky water appearance.
Guides on identifying and fixing water leaks from unit connections or components.
Details flow rates, length, width, height, and cell diameter for different models.
Covers voltage, power consumption, operating pressure, and temperature range.
General| Model | S12Q |
|---|---|
| Category | Water Filtration Systems |
| Brand | R-Can Sterilight |
| Flow Rate | 12 GPM (Gallons per Minute) |
| Maximum Operating Pressure | 125 psi |
| Type | UV Water Disinfection System |
| Inlet/Outlet Size | 3/4" MNPT |
| Operating Temperature | 36-104°F (2-40°C) |
| Certifications | CE |
