Need help?Do you have a question about the R.M. Young 06206 and is the answer not in the manual?
Important safety and usage warnings.
Instructions for installing and powering on the device.
Set up wind speed and direction alarms, including delay and relay states.
Configure the unit as a remote display via RS-485 NMEA.
Wiring for standard sensor inputs in '05', '04', or '03' setup.
Wiring for standard sensor inputs in '05', '04', or 'Hd' setup.
Wiring diagram for Model 86000/86106 Ultrasonic Anemometer.
Wiring diagram for Model 91000 Ultrasonic Anemometer.
Example wiring for master and remote Wind Tracker displays.
General| Model | 06206 |
|---|---|
| Category | Marine Equipment |
| Manufacturer | R.M. Young |
| Type | Marine Wind Monitor |
| Measurement Range (Direction) | 0 to 360 degrees |
| Accuracy (Direction) | ±3 degrees |
| Potentiometer Resistance | 10K ohms |
| Accuracy (Speed) | ±0.3 m/s or 1% of reading |
| Weight | 0.9 kg |
| Measurement Range (Speed) | 0 to 60 m/s |
| Power Supply | 12 VDC |
| Mounting | 1 inch pipe |
| Material | Anodized Aluminum |
| Sensor | Vane and Propeller |
| Operating Temperature | -50 to +50 °C |
To Next Page