Need help?Do you have a question about the R3D MINI and is the answer not in the manual?
Instructions for installing the front door panel using hinges and screws.
Instructions for attaching side door panels using door buckles.
Guide to powering on the 3D printer and verifying the startup interface.
Steps for preheating the nozzle and heating plate via the interface.
Procedure for loading filament, including pre-extrusion verification.
Performing movement tests for X, Y, and Z axes using the manual controls.
Steps to adjust the print platform for optimal adhesion and first layer quality.
Guide to changing the printer's interface language.
Executing a test print to verify machine functionality.
Instructions on how to open STL files within the slicing software.
Selecting a model and identifying key interactive elements for manipulation.
Guide to rotating models and previewing slicing effects layer by layer.
Adjusting model size using scale factors or direct input in the software.
Saving the sliced model as a G-code file and transferring it to an SD card.
Establishing a physical connection between the 3D printer and computer using a USB cable.
Locating the printer's serial port (COM) in system device manager.
Setting up the slicing software with the correct serial port for direct printing.
Loading models and initiating prints directly from the computer via USB.
General| Brand | R3D |
|---|---|
| Model | MINI |
| Category | 3D Printers |
| Language | English |
To Next Page