FFLED18 INSTALLATION INSTRUCTIONS
FFLED18-IN-1011
CLEANING & MAINTENANCE
CAUTION: Be sure fi xture temperature is cool
enough to touch. Do not clean or maintain while
fi xture is energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open the fi xture to clean the LED. Do not
touch the LED.
TROUBLESHOOTING
1. Check that the line voltage at the fi xture is correct.
Refer to wiring directions.
2. Is the fi xture grounded properly?
3. Is the photocell, if used, functioning properly?
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
US: pat D643,147, CA: Pat Pending CN: Pat Pending, MX: Pat
Pending
ACCESSORIES AND
REPLACEMENT PARTS
Chrome Wire Guard: GDFFLED18W
Poly shield: GDFFLED18P
Lens&Door Replacement: LFFLED18 (bronze)
LFFLED18W (white)
FFLED18 Cool
FFLED18N Neutral FFLED18Y Warm
To Next Page
Loading...