Race Dynamics FuelX Lite - User Manual

FuelX Autotune- Royal Enfield Himalayan
Document Version
1
Release Date
14 Sep 2021
Application information
FuelX
Vehicle
Royal Enfield
Model
Himalayan
Year of manufacture
2017-2020
Note:
● Read through all instructions before installation and use.
● Ensure that the bike is switched off and the key is out of the ignition before proceeding with the
installation.
● Some parts of the bikes might be hot/sharp and may cause burns/cuts. Proceed with extreme caution
or wait until the bike has cooled down. Always wear safety gloves.
● When the installation is complete, make sure to secure the wiring loom away from the movable parts
or components which tends to heat up during the normal operation of the vehicle at any chance.
● FuelX is intended for motorsport use on a closed course, please check with your local laws before
using this product. Race Dynamics is not liable for consequences arising out of using the product.
Support:
Call: +1 267 214 9292 / +91 9606 044 178
WhatsApp: +91 9606 044 178
E-Mail: support@powertronicecu.com
Website: www.powertronicECU.com
1

Summary

FuelX Product Description

FuelX Variants

FuelX Pro Model

Details the FuelX Pro variant, featuring 10 maps and a handlebar map switch for preference adjustments.

FuelX Lite Model

Describes the FuelX Lite variant with a single autotune map and one harness connector.

FuelX Harness and Connectors

Installation Procedure

Panel and Fairing Removal

Guide to removing motorcycle panels and fairings, starting from the left side, and preparing the bike for installation.

FuelX Configuration

Race Dynamics FuelX Lite Specifications

General

Brand	Race Dynamics
Model	FuelX Lite
Category	Motorcycle Accessories
Language	English