Note:
● Read through all instructions before installation and use.
● Ensure that the bike is switched off and the key is out of the ignition before proceeding with the
installation.
● Some parts of the bikes might be hot/sharp and may cause burns/cuts. Proceed with extreme
caution or wait until the bike has cooled down. Always wear safety gloves.
● When the installation is complete, make sure to secure the wiring loom away from the movable parts
or components which tend to heat up during the normal operation of the vehicle at any chance.
● FuelX is intended for motorsport use on a closed course, please check with your local laws before
using this product. Race Dynamics / PowerTRONIC is not liable for consequences arising out of using
the product.
Support:
North & South America : +1 267 214 9292 (Call) +91 9606 044 178 (WhatsApp)
India, Bangladesh, Bhutan, Srilanka & Nepal : +91 9916 229 292 (Call & WhatsApp)
Rest of the world : +91 9606 044 177 (Call & WhatsApp)
Email : support@powertronicecu.com
Website : www.powertronicECU.com
To Next Page
Need help?
General
