To Next PageTo Next Page
Need help?Do you have a question about the Racelogic LabSat 3 and is the answer not in the manual?
General| Brand | Racelogic |
|---|---|
| Model | LabSat 3 |
| Category | Test Equipment |
| Language | English |
Covers setup options like Clock Reference, Digital channels, CAN, RS232, and LAN configuration.
Details the replay process, using SSD, RF OUT connector, and managing signal attenuation via UP/DOWN keys.
Explains the recording process, antenna connection, bias voltage, and handling higher bias voltage antennas.
Instructions for installing, removing, and charging the lithium-ion battery pack, including status indicators.
Provides crucial warnings and guidelines for safe handling, storage, and disposal of the Li-Polymer battery pack.
Details recording CAN data by sampling signal edges; synchronised to RF, no baud rate config needed.
Explains recording CAN data into a readable text log file with timestamps for analysis.
Records RS232 data by sampling logic transitions, synchronised with GNSS data; no baud rate config needed.
Provides solutions for satellite lock issues, including antenna placement, connection checks, and cold starts.
Provides detailed technical specifications for Constellation, Output Signal Level, RF Channels, Bandwidth, etc.
