Need help?Do you have a question about the Racelogic VBOX3i and is the answer not in the manual?
Details the power input requirements and warnings for the VBOX3i.
Explains the LOG and FUNC buttons for controlling logging and sample rates.
Describes how the LOG button starts/stops logging, creates new files, and prevents data loss.
Explains the FUNC button's role in indicating and toggling sample rates.
How to restore default factory settings and the parameters they include.
Logs data regardless of vehicle movement.
Logs data only when the vehicle speed exceeds 0.5 Km/h.
Allows data channels to trigger logging based on set thresholds.
Explains LED behavior for satellite acquisition status (red, green, orange).
Indicates DGPS lock status (orange for WAAS/EGNOS, green for RTK Fixed).
Shows power source status (green for connected, red for error/booting).
Indicates brake trigger input activation (solid green).
Shows CAN data status (flashing yellow for decoded, flashing green for serial traffic).
Shows serial data status (flashing yellow for decoded, flashing green for serial traffic).
Indicates Bluetooth connection status (flashing blue for waiting/initializing, solid blue for connected).
Indicates data writing to the Compact Flash card (flashing blue).
Shows logging status (solid green for logging, flashing red for rate).
Indicates IMU integration status (orange for enabled/no IMU, flashing orange for init, flashing green for complete, solid green for working).
Records audio tags with GPS-synched timestamps alongside VBO data.
How to start, stop, and manage WAV file recordings using the headset.
How to find and play associated WAV files within VBOXTools software.
Lists the necessary hardware and cables for IMU integration.
Step-by-step guide for connecting and configuring the IMU.
Key considerations for IMU04 and IMU03 integration.
Outlines manoeuvres for optimal Kalman filter characterization.
Specifies when Kalman filter calibration is most important.
Details conditions requiring recalibration of the Kalman filter.
Explains the consequences of not performing the Kalman filter calibration.
Describes logging of heading, pitch, and roll calculated from IMU data.
Displays noise levels on speed channels for diagnostic purposes.
Lists equipment needed for using IMU04 as a CAN module.
Procedure for connecting and configuring the IMU as a CAN module.
Checklist of solutions for satellite acquisition issues.
Troubleshooting steps for issues connecting the VBOX3i to a PC.
Solutions for COM port conflicts or unavailability.
Checks for satellite reception issues affecting data logging.
Procedure for performing a GPS coldstart to resolve unresponsiveness.
Step-by-step instructions for updating the VBOX3i firmware.
General| Brand | Racelogic |
|---|---|
| Model | VBOX3i |
| Category | Data Loggers |
| Language | English |
To Next Page
