18 19
6”
14”
Backflow Preventer
6.5”
Valve Box
Instructions for cutting ¾ inch
and 1 inch PVC or PEX pipe.
Bottom fitting can be buried
up to 1 inch if needed.
Identify 14 inches of straight pipe between
the backflow preventer and the valve box.
Mark 6 inches after the backflow; this will be
the top cut (red line).
Mark 6½ inches after the first mark; this will
be the bottom cut (red line).
Put a small X next to the first two marks.
Mark 1 inches above the top mark to indicate
insertion depth (white line).
Mark 1 inches below the bottom mark to
indicate insertion depth (white line).
1.
2.
3.
4.
5.
6.
To Next Page
Loading...
Need help?
General