Overview
1-2 Verbatim Owner's Manual
! Note:
All user programming except access code and voice message recording may
be entered, reviewed or changed either from the front panel or from a remote
telephone at any time. Thus, installation and programming may easily be done
by separate personnel at separate times.
Most programming is entered in the form of 3-digit codes as described in this
manual. All user programming, including recorded messages, is maintained in
permanent non-volatile memory.
The Verbatim autodialer incorporates extremely thorough and effective electri-
cal surge protection and overall rugged construction, to deliver reliable opera-
tion under real-world conditions.
1.2 Manual Description
This manual guides you through the following procedures:
l Location and mounting
l Initial programming
l Configuring Remote Channels to monitor PLCs
l Voice message recording
l Using Your Verbatim autodialer
l Advanced programming
A glossary explaining the terms used in this manual is included the end of the
manual, along with a troubleshooting guide, an index, a return authorization
form, and FCC notice to users.
Worksheets are provided to document and clarify your programming and
message recording steps.
Please take a moment to read, complete, and mail the warranty registration card
at the back of this manual.
1.2.2 Conventions
Throughout this manual various icons are used to visually identify information.
They are as follows:
u The solid diamond symbol shows a list of procedures, decisions, or single
step tasks.
l The bullet symbol shows a list of items.
To Next Page
Loading...
Need help?
General