Need help?Do you have a question about the Raco Verbatim and is the answer not in the manual?
Detailed description of the Verbatim autodialer's function as a remote alarm monitor.
Guide to the manual's structure and sections, including conventions used.
Guidance on choosing an optimal mounting location for the autodialer, considering environmental factors.
Instructions on connecting the autodialer's wiring, including battery and power connections.
Steps for connecting a parallel printer for local data logging features.
Initial setup steps including entering program mode and clearing system memory.
Procedure for programming dial-out phone numbers into the autodialer.
Configuring input channels to define their normal and alarm states (normally closed/open).
Steps to verify the autodialer's installation and basic functionality after programming.
Overview of program codes used for configuring the autodialer's functions.
Configuration of delays before an input violation triggers an alarm and dialing.
Feature to detect telephone line faults and its configuration.
Automatic detection and selection of tone or pulse dialing for telephone lines.
Explanation of Alarm Ready Schedules as time intervals for automatic arming/disarming.
How Alarm Ready Schedules automate the REARM/DISARM process, affecting alarm responses.
Description of the three modes (Weekday, Weekend, Holiday) for scheduling autodialer arming.
Details on setting specific REARM and DISARM times for weekday and weekend schedules.
Importance of regular testing, including AC power interruption checks and battery maintenance.
Common issues and their solutions, covering unit dead, no dialing, and unit not alarming.
Instructions for programming the SFP model exclusively via remote telephone.
Procedure to erase all user programming and recorded messages.
Diagram and instructions for connecting analog input signals to the autodialer.
Steps to configure analog inputs, including signal type and spoken values.
Configuring scaling and offset factors to translate analog signals into meaningful spoken values.
Instructions for installing and operating the VRSC option for remote equipment control.
Information on the local data logger feature for printing alarms and events.
Procedure for setting the unit's internal time and date for accurate logging.
Programming the autodialer to automatically log input conditions at set intervals.
Configuring the unit to make calls when an alarm condition returns to normal.
Feature to automatically select modem speed (1200 or 300 baud) for SCADA units.
Introduction to PLC specific functions and direct connection to Programmable Logic Controllers.
Linking PLC data registers to Remote Channels for monitoring and control.
List and interpretation of diagnostic and communication error codes for troubleshooting.
Diagram illustrating the serial cable connection for local RS-232 or LDL serial printer.
Diagrams illustrating different PLC network connection configurations.
Guide for connecting the autodialer to a radio transmitter for external audio and contact closure.
Procedures and considerations for programming the autodialer to call pager systems.
Details on jumper settings for the main board (VMP-5A) and speech board (VSPE-2).
Overview of the autodialer's capabilities, including dialing and network interfaces.
Summary of parameters adjustable via keyboard or remote telephone.
Information on the internal gel cell battery and its backup capabilities.
Protection of inputs against voltage surges according to IEEE standards.
Details on the five-year warranty covering parts and labor.
Worksheets for programming phone numbers and optional parameters.
Worksheets for linking input channels to specific phone number groups.
Worksheets to plan and record voice messages for channels and station ID.
Description of the default sequence where alarms require manual reset.
Sequence where alarm states automatically reset when the channel returns to normal.
Concise summary of available annunciator sequence options and their configuration codes.
General| Brand | Raco |
|---|---|
| Model | Verbatim |
| Category | Measuring Instruments |
| Language | English |
To Next Page
